Antminer T9 10.5T

Antminer T9 10.5T

$550.00

Delivery on 20, December 2018
SKU: 0001 Category:

Description

1. Power consumption figures will vary with your PSU’s efficiency, the ambient operating temperature and the accuracy of the power meter.

2. Power supply unit is not included. You will need an ATX PSU. There are 3 PCI-e connectors for +12V DC input on each hashing board and all 3 need to be connected to the PSU for the hashboard to operate. Do not connect more than one PSU to the same hashing board!

3. Separate power supply to control board: there is one additional 6pin PCI-e connector on the IO board which must be connected to the PSU to get power. Be sure to power on the miner only after all the 10x PCIE connectors are connected to power supply.

 

Specifications

Additional information

Hash Rate 12.5TH/s. A variation of +/- 5% is expected.
Power Consumption 1576W +7% (at the wall, with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temperature)
Power Efficiency 0.126J/GH + 7% (at the wall, with Bitmain’s APW3 PSU, 93% efficiency, 25°C ambient temperature)
DC Voltage Input 11.60 ~ 13.00V
Chip Type BM1387
Chip quantity per unit 171 chips
Dimensions 350mm (l) x 135mm (w) x 158mm (h)
Cooling Two 12038 fans. Front fan: 6000RPM, rear fan: 4300RPM
Operating temperature 0°C to 40°C
Network connection Ethernet

Payment

1. The shipping cost is included in the retail price shown above. Please fill your desired quantity and shipping address.

2. Orders are confirmed only after complete payment, inclusive of shipping cost, is received by Antminer China

3. Special Provision: Order cancellation or refund request for any reason will not be entertained by Antminer China. We advise you to make any payment only after careful consideration.

4. Order cancellation or refund request will not be entertained by Antminer China. We advise you to make any payment only after careful consideration.

Warranty

1. A 180-day warranty is provided starting from the shipping date. To avail this warranty a repair ticket must be generated by the customer on Antminer China website. Overclocking the miner will void the warranty immediately.

2. All sales are final. No refunds will be granted. Defective miners can be repaired for free if they fall under the Antminer China warranty policy. After the warranty period, machines can be repaired at the cost of parts and labor.

3. The following events will void the warranty:

a. Customer removes/replaces any components by himself without receiving permission from Antminer China first;

b. Damage caused by poor power supply, lightning or voltage surges;

c. Burnt parts on hash boards or chips;

d. Miner/boards/components damage due to water immersion or corrosion due to wet environment.

4. For all repairs or RMA, within warranty or not, customer must return the defective parts at his/her own expense after opening a support ticket and troubleshooting with Antminer China instructions.

6. If you notice there are some loose heatsinks when you receive the miner, please inform us by email to [email protected] within 3 days from the date the package is received according to DHL’s website.

7. Antminer China does not take any responsibility for or compensate for any loss as result of downtime caused by delays in transportation as a result of custom formalities or other reasons.

You may also like…

Copyright © 2018 Antminer China - Building 25, North Olympic Science & Technology Park, Baosheng South Road, Haidian District, Beijing, China 100029 (+86) 138 2335 2288 [email protected]