APW3++

APW3++

$105.00

Delivery on 29, November 2018
SKU: 0005 Category:

Description

1. The power cord is not included, please find one with at least 10A from your local market.
2. The APW3++ can deliver a maximum power of only 1200W if it is connected to a 110V mains power supply. To obtain the rated power of 1600W, the APW3++ must be connected to a 220-240V mains power supply. Please check the mains power supply that is the standard in your region before ordering.
3. This batch of PSU comes with only 10 PCIe connectors so cannot be used with more than one Antminer L3+ miner.
6. Be sure to keep the original packing on hand when you get PSU, the original box should be used to return the PSU when you requesting RMA. Otherwise, it won’t be honored.

Specifications

Additional information

Output DC Voltage 12.15V
Rated Current (220V input) 133A
Rated Current (110V input) 100A
Rated Power (220V input) 1600W
Rated Power (110V input) 1200W
Ripple & Noise <1%
Voltage Regulation <2%
Source Regulation <1%
Load Regulation <1%
Setup, Rise Time <2S
Power off Protection Trip Time >9mS
Interface Type 5 pairs of 6 pin PCI-E connectors (i.e. 10 connectors)
Noise Level <43DB
Input Voltage Range 100-240V AC
Starting Voltage 95-105V AC
Frequency Range 47-63Hz
Power Factor >0.95 (full load)
Leakage Current <1.5mA (220V 50Hz)
Protection Low-voltage Input 80-89V AC
Output Short Circuit Yes
Output Overcurrent 134-185A max.
Overheat Protection Yes
Environment Conditions Operating Temperature -20°C – 50°C
Operating Humidity 20% – 90% relative humidity (non-condensing)
Structure Dimensions 220mm*108mm*62mm
Cooling Fan Forced-air cooling

Payment

1. The shipping cost is included in the retail price shown above. Please fill your desired quantity and shipping address.

2. Orders are confirmed only after complete payment, inclusive of shipping cost, is received by Antminer China

3. Special Provision: Order cancellation or refund request for any reason will not be entertained by Antminer China. We advise you to make any payment only after careful consideration.

4. Order cancellation or refund request will not be entertained by Antminer China. We advise you to make any payment only after careful consideration.

Warranty

1. A twelve months’ warranty is provided starting from the ship-out date. To avail this warranty a Repair ticket must be generated by the customer on Antminer China website. Overclocking the miner will void the warranty immediately.

2. All sales are final. No refunds will be granted. Defective PSU can be repaired for free if they fall under the Antminer China warranty policy. After the warranty period, machines can be repaired at the cost of parts and labor.

3. The following events will void the warranty:
a. Customer removes/replaces any components by himself without receiving permission from Antminer China first;
b. Damage caused by poor power cable, lightning or voltage surges;

4. For all repairs or RMA, within warranty or not, customer must return the defective parts at his/her own expense after opening a support ticket and troubleshooting with Antminer China instructions.

5. If you notice there are some loose parts when you receive the PSU, please inform us by submitting a ticket within 3 days from the date the package is received according to DHL’s website.

Copyright © 2018 Antminer China - Building 25, North Olympic Science & Technology Park, Baosheng South Road, Haidian District, Beijing, China 100029 (+86) 138 2335 2288 [email protected]